Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the nimble heat control of gas cooktops but needs an electric oven to bake? Discover a dual-fuel range cooktop that offers the best of both worlds.
Gas cooktops are favored by many home chefs who have experience in the kitchen due to their superior temperature control. They also permit them to use advanced cooking techniques such as charcoaling. These powerhouse stoves can be expensive, particularly if you require an additional gas hook-up as well as an electrician for installation.
What is a 13amp plug?
If you own a dual fuel range cooker (also known as an electric and gas oven), then you'll need an appropriate 13 amp plug. The plug will also have to be wired in the cooker ring circuit by a fully qualified electrician.
This ensures that the current flowing through the plug doesn't exceed the safe limit which could cause an electrical fire. The current is controlled by a fuse within the plug. The fuse will blow when it is deemed to be overloaded. This protects the appliance from overloads of electricity.
The fuse is listed at 13 amps as shown on the top of the plug and this is the maximum amount of current that the plug can pass without causing damage to the appliance or overheating the socket. It is important that when replacing fuses, you always use the same rated amps as the original. You risk overheating a socket if you replace a fuse that has an unrelated rating.
A 13 amp fuse will be a ceramic type, which is very durable and can withstand the high temperatures generated by a range cooker. Ceramic is also fire-proof, which makes it a more suitable choice than other kinds of fuse.
There are many ways to install an 13 amp plug. It may be wired to an existing live socket and the flex then connected to this by an screw or a plastic jaw type cord clamp. The clamp must be tightened after the plug has been tightly pushed into place.
Before connecting the wires, you may need to remove the cardboard wiring diagram which is placed over the pins of certain plugs. It is essential that the wires are cut to the right length, as being too long can cause them to be crushed when the plug cover is replaced. The earth wire should be the longest in order to connect it prior to the neutral and line pins.
How do I fit a 13amp plug?
The vast majority of dual fuel range cookers sold in the UK are connected to an outlet with a 13 amp rating and this is crucial as ovens can draw a considerable amount of current, and standard plug sockets are only rated at 10 amps.
Generally speaking new appliances should be equipped with a plug at the point of sale. This is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not be connected to a plug and this is where the problem arises.
The first step to take when connecting a cooktop to an existing plug socket is to ensure that the fuse rating in the fuse box matches the rating of the plug. This is crucial because a faulty fuse could be dangerous.
It is also advisable to check that the fuse is seated within the cartridge and that there isn't any movement within it. The next step is to prepare the flex that will be used. Remove the sheathing from the flex in order to expose the three conductors insulated within. Use a utility blade to nick the sheathing just beyond the cord grip at the point of entry into the plug. The blade will not be able to penetrate the insulated conductors. This nick should be wide enough that the sheathing can split and enlarge the nick when it is pulled back, revealing the cable underneath. Finally, cut off the excess sheathing and leave about 40mm extending beyond the flex end.
The flex is then positioned over the plug with the earth terminal at the top and neutral and live terminals at the bottom. The sheathing on each pin is removed using the coloured conductors as a guide. commercial dual fuel range cookers is then inserted to the terminal by using the cord grip. If the plug is equipped with a cord clamp that is screw-type, loosen it and then pull the insulation back to expose the copper wires. Then, connect each of the conductors insulated to the appropriate terminal (starting with the earth before neutral, and then the live) by using the channel that they run through in the plug.
What is the maximum current draw of a 13amp plug?
The maximum current draw for 13amp plugs at 230volts is 3kw. This is a lot of power, however the standard fuse in a UK plugtop will not fail until the cable has heated to a dangerous temperature. It is essential to be aware of the power you're using in your kitchen, as an unfit plug or socket could cause an explosion.
The fuse in plugtops is ceramic, about 25mm long and rated for 240V mains. They'll have the BS kitemark or similar mark on the side, and they contain sand. Glass or plastic alternatives are available, but should not be used in combination with a live plug.
In the UK, most dual fuel range cookers are wired. They are not able to be plugged directly into an outlet on the wall. They are typically connected to a dedicated cooker ring circuit that is suitable for appliances that use up to 20 amps.
You can check the ring circuit in your home by looking at the fuse box or asking a local electrician. They will be able tell you if the sockets in your home are on the same ring or separate and whether there is a separate circuit for your oven.
If you're in the market for a new dual fuel range cooker the size of your kitchen is a crucial factor to consider. We have a wide choice of cookers to fit any space, from compact 50-60 cm dual fuel models as well as huge 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.
If you're looking for something a little more unusual Don't worry, we also have a wide selection of electric and gas multi-functional cookers. These multifunction cookers can be used to cook a variety of dishes including curries, casseroles, and pasta!
Currys offers a variety of Cookers. Browse our online collection or visit us in our store to see the range. We offer free delivery and home installation on select range cookers, and also flexible payment options. Our team is on hand to answer any questions you might have. Contact us by email or telephone. Credit is subject to status and terms & conditions apply.
What is the maximum current draw of the cooker switch?
There is plenty of confusion over what the maximum current draw of a cooker's switch is. The fact is, most cookers aren't made to plug into the standard socket, but rather are hard wired and connected to a specific oven ring circuit. This is because they typically consume more than 20 amps when the gas hob and electric oven are in use.
Therefore, you cannot find a dual range cooker with a fuel source that can be fitted to a standard socket because this could create a serious fire risk and would be in violation of electrical regulations. An experienced electrician will install any new electrics to the kitchen cooker, and they will ensure that the load (both the oven and the hob) will not exceed the capacity of supply of that circuit.
Dual fuel range cookers mix the ability to cook with the sensitivity of a gas stove with the precision and precision of an electric oven. They are therefore a favorite among both home cooks and chefs. Dual cookers with fuel ranges are ideal for experimenting with various cooking techniques, like searing or charcoaling.
When purchasing a new range cooker you'll have to consider various aspects like size, performance and cost. Additionally, you'll also need to make sure that your home is equipped with an appropriate gas hook-up to the appliance. If commercial dual fuel range cookers 're not sure you're not sure, it's recommended to get a Gas Safe engineer inspect your home prior to installing.
The Currys range of dual fuel range cookers offers options that can be adapted to a range of budgets, ranging from low-cost models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something bit more sophisticated, we also stock a variety of top JennAir ranges, featuring a number of innovative features.
When commercial dual fuel range cookers purchase a new dual fuel range cooker, it's crucial to consult the manual of the owner for specific information regarding the gas and electrical requirements. You must make sure that your home has a gas hook-up suitable, and you may need to have a plumber install this for you, if needed. You may also need an individual cooker-ring circuit installed by a qualified electrical engineer.